Which fields are required in Merchant Center, and why do products get disapproved? Shopify setup steps, fixes for GTIN and price mismatches, and a weekly checklist.
If you want your products to appear in Google's Shopping tab and in the product panels in search results, you first have to send accurate, complete product data to Merchant Center. This article walks a Shopify merchant through the setup, the fields where product data most often goes wrong, and how to fix products that are not approved.
What Is Merchant Center and What Does It Do?
Merchant Center is the dashboard where you send your product data to Google and track each product's approval status. The data you submit is used in both Shopping ads and free listings. In Google's country documentation, Türkiye is among the supported countries for Shopping ads and free listings with the Turkish lira (TRY) as its currency, and the Shopping tab is available there. Turkish is also among the supported languages.
That means that even without an ad budget, setting up your product data correctly makes your products eligible to appear on Google surfaces. Appearing is not guaranteed, though; approval and ranking depend on Google's evaluation. If you plan to advertise later, you will use the same data foundation, so fixing it first makes sense.
Before You Start: Site and Account Requirements
According to Shopify's Google & YouTube channel documentation, your store footer must show a refund policy and terms of service through the Policies link type, plus at least one contact method: phone, email, address or contact form. On the Google side you need:
- Administrator access to the Merchant Center account.
- The same email address across all connected Google services.
- No multi-client account; these cannot connect directly to Shopify.
- Your primary domain verified and claimed in Merchant Center.
Google's policy center expects sites to look professional and be truthful. Listings that push users to buy without giving all relevant information, or that do not describe the product accurately, realistically and truthfully, count as misrepresentation. Enforcement ranges from disapproving the product to limiting impressions, and account suspension for repeated or egregious violations. We suggest reviewing your legal pages with our legal texts checklist.
Setup Steps With Shopify
- Install the channel: Install the Google & YouTube channel from the Shopify App Store and authorise it with "Connect Google account".
- Connect Merchant Center: Select an existing account or create a new one. Verify your identity with the 6-digit code sent to your phone.
- Verify and claim your domain: Check that your primary domain is verified in Merchant Center.
- Set country and language preferences: Choose which country and language to sync products for.
- Enter shipping settings: Import them automatically from Shopify or define them by hand. If shipping rates are missing for the selected countries, products will not sync.
- Optional connections: Connect Google Ads for conversion tracking and GA4 for measurement. For the measurement setup, see our GA4 e-commerce tracking article.
- Wait for the first sync: According to Shopify, products sync automatically after setup; the first sync can take up to 24 hours. After that, updates flow through on their own as information changes.
If your store setup is not finished yet, start with the Shopify store setup guide; Merchant Center runs into trouble on a store with a missing policy page or shipping definition.
Required Product Attributes and Their Limits
According to Google's product data specification, these attributes must be submitted for products to be served in ads and free listings:
- id: The product's unique identifier, up to 50 characters. Use the SKU where possible.
- title: Up to 150 characters; it must describe the product accurately and match the product page.
- description: Up to 5,000 characters; it should be consistent with the product page content.
- link: The product page URL on your verified domain.
- image_link: The main product image. The same document states that a minimum of 500 x 500 pixels applies from 31 January 2027.
- price: With currency (ISO 4217, for example TRY) and identical to the price at checkout. Outside the US and Canada, the price includes taxes such as VAT.
- availability: One of in_stock, out_of_stock, preorder or backorder.
There are conditional attributes too. brand is required for new products other than movies, books and musical recordings. gtin is strongly recommended; mpn is needed if the product has no manufacturer-assigned GTIN. If a product has no GTIN, MPN or brand, identifier_exists is set to "no". condition is required only for used or refurbished items.
In practice the fields that create the most work are price, image and identifiers: the price must match checkout exactly, the image must be in a supported format (JPEG, WebP, PNG, non-animated GIF, BMP or TIFF), and a GTIN should be entered only when you are sure it is correct. Checking these three fields across the whole catalogue in bulk is far more efficient than opening products one by one.
Why Products Get Disapproved: The Five Most Common Causes
1. GTIN and brand problems
Google says the correct GTIN delivers the best performance; submitting a product that has a GTIN without one can limit its visibility. If you submit an incorrect GTIN, the product is disapproved, so do not fill in values you are unsure about. A valid GTIN needs a correct check digit and must contain no dashes or spaces. Setting identifier_exists to "no" is appropriate only in specific cases (for example unbranded apparel or a product with no GTIN); sending "no" when identifiers actually exist is also a reason for disapproval.
2. Price and availability mismatch
The price and availability in your feed must match the product page. The rules in Google's documentation: send updates right after the site changes; enter validity dates and time zones correctly on sale prices; the product page must show prices in the target country's currency and in the same currency as your product data. You can fix mismatches from the "Needs attention" tab in Merchant Center, one by one or by downloading a CSV, correcting it and re-uploading. If you use the Shopify sync, correcting the source in the store admin is enough.
3. Missing category-specific attributes
According to Shopify's documentation, apparel requires age group, gender, colour and size; books need ISBNs and media products need UPC/EAN/JAN.
4. Missing shipping information
If shipping rates are not defined for the selected countries, products will not sync.
5. Site and policy problems
A missing refund policy, unreachable contact details or pages that describe the product misleadingly can put products or the account at risk.
Keeping Product Data in Shape
In the Shopify app each product's status shows as "Not approved", "Limited", "Under review" or "Approved". Click the problem product and make the fix on its product details page; the change syncs to Google automatically. Use title wording that actually describes the product and matches the product page exactly; for how to build the page content itself, see our product page SEO article.
Automatic item updates in Merchant Center help keep your data current by reading price, availability and condition from the structured data on your product pages. Google states that this is not a replacement for regular data updates and is designed to address temporary accuracy issues. In other words, keeping the source system (your store) correct is the real fix.
Four Common Mistakes
- Ignoring warnings: The number of unapproved products grows slowly, and by the time you notice, much of the catalogue may be out of service. Watch the status weekly.
- Filling in identifiers by guesswork: A made-up GTIN does worse than none at all; the product is disapproved.
- Keeping data in two places: If price and stock do not come from the store admin, the feed and the product page drift apart. If you sell across several channels, apply the single-source logic from our stock and price synchronisation article here as well.
- Leaving policy pages for later: The refund policy and contact details are a precondition of setup; even flawless product data will not get past these gaps.
Weekly Checklist
- Check the number of unapproved and limited products in Merchant Center and the Shopify app.
- Close any new mismatches in the "Needs attention" tab.
- Verify that newly added products have GTIN, brand and shipping information filled in.
- In discount campaigns, check that end dates agree between the page and the data.
- Confirm that the policy and contact pages are still in the footer.
Hypothetical example
Say your catalogue has 1,000 products and 150 of them (15%) show as unapproved. Assume those 150 products could bring in 30% of the 100,000 TL monthly revenue expected from Google surfaces. The monthly opportunity cost of staying unapproved is 100,000 × 30% = 30,000 TL. If you assume most of the problems come from two or three categories (for example missing GTINs and shipping definitions), one bulk correction pass gives much faster results than handling products one at a time. These figures are entirely hypothetical; recalculate with your own revenue and approval rate.
Conclusion
Merchant Center is a channel that needs ongoing maintenance rather than a one-time setup. Complete the site and policy requirements first, fill in the product attributes correctly, then monitor approval status weekly. Once the data foundation is solid, both free listings and ads draw on the same infrastructure.
Sources: Google Merchant Center Help, Product data specification, Supported countries, Automatic item updates and Price/availability mismatch pages; Google Shopping ads policy center; Shopify Help Center, Set up the Google & YouTube channel; Google Merchant Center Help, Syncing your products (2026). The worked example is hypothetical.